- Products
Madas Gas Pressure Regulator
Gas pressure regulators deliver a constant pressure value downstream as the inlet pressure and/or flow rate varies. The compensated shutter guarantees precision in the regulation of the outlet pressure even in the case of large and sudden variations in the inlet pressure.Â
These regulators are used in both commercial and industrial installations that use natural gas, LPG or other non-corrosive gases (dry gases).
Gas Pressure Regulator
P1max- 0.5 – 5 barÂ
Size- DN 15-20-25-40-50-65-80-100
Reference standards: EN 88-2 – EN 13611.
In compliance with:
PED Directive 2014/68/EU,
ATEX Directive 2014/34/EUÂ –Â II 2G – II 2D
FRG-RG/2MCC - FRG-RG/2MCS
P1: 0.5-3 bar – P1: 0.5-5 bar
DN 15-20-25
FRG/2MBC - FRG/2MB
DN 15-20-25
RG/2MCS - RG/2MBZ
DN 32-40-50
With Safety Shut-Offs
RG/2MCS - RG/2MBZ
P1: 0.5-5 bar
DN 65-80-100
With Safety Shut-Offs
RG/2MCSH - FRG-RG/2MBH...
DN 15-20-25
HIGH P2 with Safety Shut-Offs
RG/2MCSH - RG/2MBHZ
DN 32-40-50-65-80-100
HIGH P2 with Safety Shut-Offs
Gas pressure regulators can be equipped with the following safety devices and accessories depending on the needs of the system :
1. Downstream overpressure shut-off device (OPSO): interrupts the supply when the regulator outlet pressure exceeds the device calibration value. The OPSO device is always present on these devices.
2. Downstream minimum pressure shut-off device (UPSO): interrupts the supply when the regulator outlet pressure falls below the device calibration value. It also intervenes in the event of a lack of upstream power supply. They can also be supplied without UPSO device.
3. Relief valve: discharges small flows of gas to the outside if overpressure occurs downstream of the regulator. This exhaust can be conveyed outside in the case of installations in environments with poor ventilation. They can also be supplied without relief valve.
4. Outlet pressure tap.